Vigilant Vision LED MONITOR Manuel d'instructions télécharger pdf (Page 5)

Connect your yellow video cable( video in).

Connect a video cable to the BNC1 or BNC2 INPUT jack on the back of

the monitor and to the Video Output jack on the DVD player or a camera.

Connect your red and white audio cables.

Connect the audio (red and white) cables to the AUDIO INPUT R and L

jacks on the back of the monitor and to the Audio Output jacks on the DVD

player.

Viewing the Picture from the Connected Device

1.Plug in the monitor and the device, if they aren't already plugged in.

2.Turn on the MONITOR and the device you want to view, for example a

DVD player.

3. press the SOURCE button on the remote control until you see AV1 (if

connected to the VIDEO INPUT 1 jack) or AV2(if connected to the AV2

jacks) displayed at the top of the monitor's screen.

Note: If the picture from the DVD player appears blue and your device is

connected to the VIDEO Input, you might be tuned to the wrong input. Make

sure you press SOURCE until you see AV1/AV2 displayed at the TOP of the

monitor's screen.

（Ⅲ ） HDMI connection

High-Deﬁnition Multimedia Interface (HDMI) technology is an uncompressed

digital connection that carries both video and audio data by way of an

integrated mini-plug cable.

Using the example of a set-top box or a DVD player:

•If your set-top box has an HDMI jack, connect an HDMI cable.

Connect an HDMI cable to the HDMI Input jack (or the HDMI2 jack if it is

more convenient) on the back of the monitor and to the HDMI Out jack on

the back of the device.

If your DVD player has a HDMI jack, connect an HDMI cable and an

HDMI adapter.

A. Connect an HDMI cable to the HDMI Input jack on the back of the

monitor.

B. Attach an HDMII adapter to the end of the HDMI cable, then connect the

adapter to the HDMI Out jack on the DVD player

C. Since you’re using an HDMI adapter, you need to connect Audio left and

right cables to the DVD AUDIO R and L jacks on the back of the monitor

and to the R and L jacks on the back of the device.

Viewing the Picture from the Connected Device

The device in this connection is connected to the HDMI jack. To view this

device:

1. Turn on the monitor and the device you want to view, for example a set-

top box.

2. press the source button on the remote control until you see HDMI

displayed at the top of the monitor's screen.

3. Connecting the Monitor Cables to your Computer

You should be sure all cable connections are secure -- tighten all cable

screws. Shaking and vibration may dislodge cables that are improperly

connected. Route all wiring and cabling away from heat sources and sharp

metal edges to avoid damage. Also, keep the touch screen cable away

from sources of electromagnetic and radio frequency interference.

4.Testing the Monitor

After connection, turn on the power switch located on the rear(or side)

bezel. Before you test your monitor, make sure all cables are connected

properly and routed through the cable management system. Be sure to

tighten all cable screws. To test that the monitor is working properly:

1. Turn on your computer.

2. Make sure the video image is displayed. If it is not, turn on your monitor.

Ensure the LED is blue – red indicates power but no signal.

3. Make sure the video image is centered within the screen area. Use the

monitor controls to adjust the image, if necessary. Perform an Auto Config

first, then if you wish you can adjust the horizontal and vertical position,

contrast, and brightness to better suit your video card and your personal

preference. Refer to Basic OSD setup for more information on using the

on-screen menu to adjust the video display.

Controls & Functions

Ⅰ、 Buttons on the lower-right part of the panel

If you cannot locate your remote, you can use the side panel buttons of

your monitor to operate many of the monitor’s features.

1 2 3 4 5 6 7 8 9 10 11

Commentaires sur ces manuels

Pas de commentaire

Vigilant Vision LED MONITOR Manuel d'instructions Page 5

Commentaires sur ces manuels

Produits connexes et manuels pour Téléviseurs et moniteurs Vigilant Vision LED MONITOR